Steel buildings, Metal buildings, Self storage buildings, Mini storage buildings

Information Center

Building Types

Color Chart Roof and Wall Panels

Roof and Wall Panel Color Chart

Roof and Wall Panels
Roof and wall panels offer the building user a choice of the best of exterior finishes: color coated panels, a superior silicone-polyester painted finish which is available with a 25 year limited warranty; or Galvalume, an aluminum/zinc alloy-coated steel panel.

Color Finishes
A superior color finish that remains beautifully tough for years and years, panels are available in a range of contemporary colors. These panels and color trim can be combined to provide a contrasting or complementing finish that is architecturally attractive.

Galvalume®

Galvalume panels are formed of steel sheets that have a coating that is about 55 percent aluminum and 45 percent zinc by volume. The result is a steel sheet that is highly corrosive resistant. Galvalume offers the building owner the best features of both aluminum and zinc: the durability and long life of aluminum coatings; and the galvanic protection of zinc coatings.

26 Gauge Roof and Wall Panel Profiles

PBR - Roof Panels

PBR Roof Panels are roll formed from 50,000 psi yield steel in 26 gauge. Panel coverage is 36 inches with 1-1/2 inch deep major ribs at 12 inch centers and 2 intermediate minor stiffening ribs plus 2 pencil ribs in each flat. PBR Roof Panels may have Galvalume, all standard colors (see color chart) or white finish. A UL90 wind uplift rating is available with 6 inch maximum thickness blanket insulation.

PBR - Wall Panels

PBR Wall Panels are roll formed from 50,000 psi yield steel in 26 gauge. Panel coverage is 36 inches with 1 3/16 inch deep major ribs at 12 inch centers and 2 intermediate minor stiffening ribs in each flat. PBR Wall Panels may have a finish of Galvalume or Painted. Refer to color chart for availability. These panels may also be used for wainscot, soffit, or fascia sheets.

PBA - Wall Panels

PBA Wall Panels are roll formed from 50,000 psi yield steel in 26 gauge. Panel coverage is 36 inches with 1 1/4 inch deep reversed major ribs at 12 inch centers and an intermediate break line plus 6 pencil ribs in each flat. MSP Wall Panels may have a finish of Galvalume or Painted. Refer to color chart for availability. These panels may also be used for fascia sheets.